I tried the spryte BVC coils and they don’t seem to fit as there is a ring above the threading that is a little to big compared to the pal 2 coils that stop the coil from fiting in the pod all the way.
when is it going to be released?
I pre-ordered at heaven’s gift and heard it was going to be shipped this week
but they suddenly changed saying it’s gonna be next year….
what’s going on? i need to know what happened
Man, so close to perfect. All that’s needed is adjustable wattage or at least consistent wattage. I hate how the loss of battery decreases the wattage and vape performance. Just need to a few selectable options like what Innokin did with the EQ or DV.
That’s the dream, 1000 mah, coils for both MTL and sub ohm DL, adjustable air and power settings in a attractive portable device.
I have the Pal2 since a few days ago. With the 0,6ohm mesh you got a smooth and warm vapor, plenty of flavor and good airflow for DTL vaping. If you close the airflow you can also use as MTL if you prefer.
During your puff you should notice a little voltage drop. I like it. It’s starts hard so the kanthal mesh can reach temperature and then it’s drops a little after 2-3 seconds… for me it’s a pleasure sensation.
Works great with 70/30 liquids, but you loose some throat hit compared with 50/50. In my case I vape with just 10mg/ml salt liquid, but I prove it with 20mg/ml salt and it’s not excessive the throat hit.
Cons… I should prefer a clearer pod so it’s difficult to see the liquid level… furthermore when you are refilling it.
Hye Artery. I just got my Artery Pal II. It’s was a AMAZING device though. I already love it. I have a suggestion for you. If you can design a catridge with 510 drip tip compatible, the Artery Pal II is more than better. Thank you for a great device Artery <3
I recently purchased a Pal2 the coils that came with it did not last I purchased some Aspire spryte bvc coils and it is flooding with them. Already sent an email to your customer service and have not had any response yet.
Hi Jeffery, sorry for the issue. but “sales03@arteryvapor.com” had replied to your email yesterday, please check it. About the issue, We wonder how long the original coils last you, as for the aspire BVC coils, we are sorry that we don’t know it could have flooding issue, and I wonder how many aspire bvc coils you tired which have the flooding issue.
Thank you for getting in contact with me about the issue. The 1.2ohm coil lasted about 3 or 4 days and the mesh coil lasted about a week. I am using 24mg salt nic and the flavor was awesom especially with the mesh coil but they stopped wicking then they were burned.
Hi, I just confirmed it. 1A charger won’t damage Pal2, it has protection. You can continue to use the 1A charger.
the max 800mah means even you use 1A charge, the input current still will be 800mah, we had set it in the chip. So you can use the 1A charger.
How do I change my pal v2’s battery? When I fully recharge ( The blue light is off ) I try to take a hit but the light turn to red and flicked 3 times. I think the battery may have some troubles 😕
Hi, the red light flicked 3 times means the atomizer is not connected. Please check the pod or the coil whether connected effectively. If you still have any question, please feel free to contact us at cs@arteryvapor.com or mia@arteryvapor.com.
Hi syed ,maybe it is the battery low-voltage shut down or invalid ,you can retry to recharge one hour again ,if ok ,then it can work normanly,if fail ,so it proved that the battery is invalid .
Please check your pod or the coil, try to replace the coil. Try to loosen the base slightly if it still no work. Please feel free to contact us by cs@arteryvapor.com if you need more customer service.
ive got a suggestion the guys at work love my artery and i already own a couple of different vape pens and tanks. My artery was like 65,00 with the ejuices i picked it was apple crisp and the starburst was free and the pod was 3.75 with the free coils. would you consider doing like a t-shirt deal with the purchase of an artery 2 and a pod. they guys at work said they would go for it if a t-shirt or hat or both was in the deal thats ow they got their smok vapes with a t-shirt deal and thety dont like their smok device anymore they got first degree burns with those things as did i and the same thing with the compaq s series i was given a free replacement and they paid the dr bills in exchange for not suing them. im not new to vaping but when you follow directions to the letter and still get hurt thats ridiculous. anyways i jst thought id suggest this. i got my artery vaporbusters 2 in lebanon tn
Using it for about a 1,5 weeks. And the taste is awesome, battery life is pretty good, filling system is pretty comfortable, overal quality is good. BUT. That side cover that does not close completely does rattle contanlly makes me soo mad.
P.S. It would be better, if user would be able to disassemble the device if he need to fix something (only an opinion).
Hi Tim, sorry for the cover’s issue. We don’t suggest non-professional disassemble the device, that will cause damage to the device. And we won’t warranty for the privately disassembled device.
my suggestion for this product : better if the back cover is clear material like plastic cover as it can give clear look to the liquid level in the pod
What does it mean when the light on the side changes from blue to purple? I have had the device for 2 weeks and have successfully used it to go from a pack a day smoker to a successful quitter. I love the device. Just can’t seem to figure out the light colors and their meaning.
Hi John, the battery can’t be replaced. Please do not disassemble the device, that will cause damage to the device. And we won’t warranty for the privately disassembled device.
This item is fastselling in malaysia, to find new OCC and catridge is so hard as many outlet out of stock. My question is, for how long you will keep supplying parts for this model before discontinued it?
Haii., in manual it said during charging, after blue pulse, it will become constant., but mine directly after blue pulse the led is shut off.. is this normal or should i get help? Thank youu
Hi, sorry for the issue, it’s the chip reading wrong cause the light wrong. But it still will turn off the light when fully charge. It won’t affect your normal use.
Please assist the Lost Flave Orion company with a new pod designed like the Pal 2. I wish that I would have seen your beautiful little device before I bought my 70 dollar paper weight from them. I love your design and can not find much to be negative about other than the fluid level may be a little hard to see but I will be getting one of these little machines. Wouldn’t it be cool if it had a window in the cover with an LED somewhere around the pod to check fluid level.
Got my the pal 2 kit today and I cant stop vaping it. Love the kit and would recommend it to anyone. Well done Artery and Tony b you guys have overdone yourself. RSA
Hello,I just got a new ARTERY PALII from my website dealer…but now I’m very interesting to buy a protective cover like I have been seen in your INSTAGRAM page…can you please tell where I can buy it…?!??!??
Hi my artery cant charge… I’ve try to charge.. at first 3 sec it blink blue color then nothing happend… i try to on but it turn to red color for 3 time then off
HELLO GUYS I JUST GOT MY LOVELY PALII AND I’M VERY EXCITED…BECAUSE IT WORK GREAT WITH THE 1.2 coil ON MY PREFERRED 50/50 TOBACCO JUICE AND I HOPE IT WILL BE SAME WITH THE 0.6 coil ON 70/30 JUICE…NOW I WOULD LIKE TO PROTECT WITH A KIND OF WRAP OR SOMETHING LIKE THAT…CAN YOU PLEASE HELP ME OUT TO FIND SOME WAY OR PLACE WHERE I CAN GET ONE…?!?!?
BEST REGARDS.
El mejor por que he probado hasta el momento tanto para sales de nicotina como para líquidos con nicotina normal. Buen sabor tanto la resistencia de malla como la resistencia normal, grandioso golpe de garganta, durabilidad de la batería más que buena, cómodo rellenado y cómodo para el día a día donde portar un pod cómodamente y encima es precioso.
Hi, I’m very happy with this super machine, it’s great. I want order a replace coil and I’m in Europe. Can I replace for a 3ml coil or should I order the 2ml coil.
Why in Europe the coil is 2ml instead 3ml ?
Apprecaite your help, thank you very much.
Hi, on my pal 2, the metal part that connects to the coil inside the pod (below the mouth piece) is a little off axis only when I put the coil in. Today my device starts spitting in tiny amounts but enough to ruin the flavor and taste bad in my mouth. How can I fix this why is this happening?
Besides this love the device, thanks!
Mine keep blinking red lights 3 times too often..i’ve already tighten up the occ & atomizer, but still the red lights keeps blinking. this is very frustrating. Pls tell me what to do. Thanks.
Please check your pod or the coil. Try to loosen the base slightly if it still no work. Please feel free to contact us by cs@arteryvapor.com if you need more customer service.
Hi Artery…Which is better way to charge the device? What I mean, is better to take out the cartridge during charging time or is it ok if just keep the cartridge inside during charging? Thank you!
Hi, we don’t suggest non-professional disassemble the device, that will cause damage to the device. Please contact us by cs@arteryvapor.com for customer service.
can anyone help me solve my artery pal 2 problems? i dont know what the problems it is. when i started to suct. i see the red light blink 3 times & then the smoke doesnt come out. but my battery already charged. i think its all about the occ or the airflow ring or the cartridge or something else, i dont know. but can anyone help me solve this. thank you!
Hi, blinking 3 times means the atomizer wasn’t connected. Please check your pod or the coil. Try to loosen the base a half turn if it still no work. Please feel free to contact us by cs@arteryvapor.com for more customer service.
Hello
the product is frankly good but I think there should be another intermediate coil like 0.8 ohm or similar. You are going to manufacture coils for this good device?
Hi. I have a problem with the pod. The blue led still on when I push the button while it is off. Is it normal? When I charge. The blue led turn on then turn off but my battery is about to die.. The led shows red while I vaping. Hm
Hey guys i dont know why but my 1.2/0.6 coil both lasted very short like 3-4 days and by that time it’s started to taste burnt or no taste compared to the first time I installed any coil. Why???!
Are you going to release the version with the magnets behind the plastic? I have two and in both of them the magnets are exposed and both of them the magnets popped out. I glued them back in on the first one but now the cover doesn’t fit tightly. It’s a very annoying problem for an otherwise great product.
Hi Artery…
I have one suggestion here. I’m excited about your 1.0ohm MTL coil. But so sad it comes in regular coil instead of mesh coil. For me, it is better firing with mesh coil because the area of the firing is bigger compared to regular coil. I’m very sure many users out there are using 0.6 mesh coil for salt nic ejuice. Why? Because it produce better firing with high power wattage, and the area of the for the firing is bigger. Even more throat hit compared to regular coil. Maybe you can produce 0.8ohm MTL mesh coil? So you can list up your occ with 0.8ohm MTL mesh coil also.. Just my 10 cents….cheers!
Hi, thanks for your suggestions. We tried the 0.8 mesh and 1.0 mesh, the performance is not very good, but we gonna release an updated 1.0 coil, use a different material, the performance is very good, amazing flavor plus long-lasting (30ml e-juice consumption )
it will be released 2-3 weeks later.
Now Malaysian Market got many shop sell Arworld R3 OCC coils. Shoppers told their customers this coils better than previous one that made by Artery itself? Does this true? Or Arworld got license to make OCC for Artery too?
The R3 coils are not authorized by us, we tested their coils, the advantage of the R3 coils are wetter than our coils, they will get spit back, and easy to suck e-juice into the mouth, which seems may make people feel more flavor, and with coils get wetter , but good news is we will release the improved HP CORES (high-performance coils ) 2- 3 weeks later, it will bring amazing flavor and long-lasting.
Hi, can i wash and reuse the .6 and 1.2 coil? If so, instruction for washing? Very satisfying product and already poisoned 3 of my friend to buy. Cheers
I just got my Pal 2 and I didn’t think I could find a vape I liked as much as my Orion DNA but this device is amazing and I buy a lot of devices Smok Nord is terrible the VapeAnts E8 is ok Aspire AVP sucks and that’s just in the last few months. Finally Pal 2 and Orion devices that satisfy my nicotine fix as much as the expensive JUUL. My only complaint is that you don’t supply pods and I purchased 2 of them. One of the pods works fine and has my .6 coil the other which is the one I prefer has the 1.2 coil which the bottom air flow will not open and I’ve even tried putting a little juice in it I tried so hard I removed it from the plastic seating pushed it back seems not to leak but still can’t open the air flow.
If possible I would like that pod exchanged. They are the newer pods which are clear but either is fine. Also one last question you now advertise a 1.0 coil what’s the difference? Why the change? (I really like the 1.2 but I’m curious to try the new one) and can I still get the old ones?
Hi, thanks for your support. 1.0ohm coil will bring amazing flavor and longer lifetime. About the pod, please contact cs@arteryvapor.com for more customer services.
By the way if you do make a drip tip style pod like people keep asking keep the original design as well I love the tip you are using now don’t think you need to change it I actually wish my Orion had a tip like yours.
Great job on design can’t make everyone happy!!!
I mainly bought this device because of its small size and the reviews I read were 99% positive. I don’t need something that can make clouds so thick u can’t see, or a giant battery mod that lasts days and has 20 different settings I know little about. I want a simple device that I fill and it just works! And THIS IS IT! U just fill it up with your favorite juice, AND VAPE! It has real nice clouds and excellent flavor with mouth to lung hits, as well as the same good flavor with real descent big clouds on straight lung hits too! They even include 2 coils. 1 for mouth to lung and 1 for direct to lung hits. And the battery lasts all day too! This was a impulse buy to have a small light AIO to carry in my pocket with ease and convenience and it turned out to be a really GREAT device i’ve quickly come to love and use daily. U wont regret buyin it now!
hi,could u please tell me which way is the direction to open the airflow? left or right? i am a recent quitter of tobacco and this is my first pod.now i only use the default airflow set…nice taste btw 🙂
ah,thank you so much for the reply.so i just have to turn the airflow right until i can’t turn it again,and that’s the maximum for the loose airflow,right?
ah,thank you so much for the reply.so i just have to turn the airflow right until i can’t turn it again,and that’s the maximum for the loose airflow,right?
Hi, I just got my device today and why is my artery metal gold making a buzzing sound when I’m firing the device? I noticed the sound after it was fully charged.
I m in Malaysia, i bought and use Pal II for only less than 2 months and now cant be used. The shop says no warranty.
I feel cheated. Is Pal II a reliable product amd how come it doesnt have warranty if faulty?
It is in reality a nice and useful piece of information. I’m satisfied that you shared this helpful information with us. Please keep us up to date like this. Thank you for sharing.
Hi…… I just bought my artery pal 2 device……. After 2 weeks of usage the fire button gives 3 times red light and cennot heat up the coil…… What is the solution?
I just bought a new pal 2 and fill it with freebase e-juice, my local vape store recommend me to use 50:50 pg/vg ingredients, what happen if use other ingredients ? And what happen if I’m using a max vg ingredients instead ? I would like to know your recommendation. Thank you ~
Hello, because sometimes the device was influenced by the environment ,temperature,humidity and so on,so the divice it will get the wrong reaction ;Anyway ,you just charge one hour is enough ,it won’t influence your usage !
Hi
I just bought the pal 2 update version
Why does my led still pulsing blue color even i have charge it for 2½ hours. Normally how long it take to fully charged?
Tq
Hello, because sometimes the device was influenced by the environment ,temperature,humidity and so on,so the divice it will get the wrong reaction ;Anyway ,you just charge one hour is enough ,it won’t influence your usage !
Hello Artery,
I got a problem. I bought this device, after 5 days of usage the fire button gives 3 times red light and cannot heat up. I try to put my catridge to other pal is works can heat. Fix my pal device is broken. Can i have new one? 🙁
Hi artery,
Can anyone help me, my artery pal 2 cannot be charge. When I plug in the usb, the blue light was came out but just a few seconds then no light appear. I used more than 2 months but this is the first time happen.
Is that battery problem or the charging pod problem?
I has Bought 2 Pal II without windows e juice & with windows ejuice…I think pal II without ejuice is more saving battery than Pall II with windows ejuice…
Can you get any color with a liquid viewing window? If not, which colors have liquid viewing windows? And, without a liquid viewing window, how do you see the liquid?
hi there… can i know which one that is arterypal 2?? as above image i can see two different mod?? one the ‘PAL 2’ grave at side top of mod and another one at side middle of the mod??
hello, thanks to this device,has been 3 months i totally quit tobacco smoking from almost 2 packs a day,to none.
but for few days, my device starts making beeping sound everytime i press the firing button.the sound gets louder when the battery full,and makes me concern. Is this dangerous? or does my pal 2 broken? thanks before
Looks like a great little pod can not wait to see it. Keen to try the mesh coil
Thanks for your support!
How can i get a cotton of artery occ 0.6?
Hi,we didn’t sell the cotton sir ,you can go to the vape store to buy the cotton.
How do i get this?
Hi, it will available in Element vape and My vapor store next week. please keep tuned.
When will it be released in the US? Can’t find it anywhere.
Hi Terry,element vape and my vapor store will release it next week. then other stores will release.
Are they in the UK yet
Hi Darren, not yet, but it will available in the UK soon. please keep tuned.
Is this one compatible with the nautilus bvc coils also?
Hi Tony, no it compatible with spryte BVC coils.
I tried the spryte BVC coils and they don’t seem to fit as there is a ring above the threading that is a little to big compared to the pal 2 coils that stop the coil from fiting in the pod all the way.
Coil material? Kanthal?
Yes, Kanthal A1
Are you guys selling them right now on this website?
Hi Justin, our website doesn’t have a store yet.
Where can I get a pal 2 at?
I have checked the 4 sites that were told to me that would have them on the 18th….and they’re still not on there! I NEED this NOW!!
Hi Jackie, sorry for the delay. We plan on the 18th, but the shipping time has increased. it will available asap. thanks for your support!
Are there any other coils compatible with this device?
Hi, it compatible with Aspire Spryte BVC Coils.
when is it going to be released?
I pre-ordered at heaven’s gift and heard it was going to be shipped this week
but they suddenly changed saying it’s gonna be next year….
what’s going on? i need to know what happened
Hi Steve, it had been released. Elementvape and myvaporstore had available now. Perhaps it’s the shipping issue.
Im interested in purchasing a pal 2 when will it be available in the us ?
Hi, Elementvape and myvaporstore are available.
Just got mine this morning and I can’t get enough of it… the flavor is amazing…. The Best Pod System or AIO to date period…
Can you use 50mg salt nic in the mesh coil?
Hi Ryan, we suggest you use the ≤20mg nic salt in the mesh coil, or you can use 50mg nic salt in the 1.2ohm MTL coil.
If i use 50 in the mesh will it burn out the coil quicker or will it last just as long?
Ryan, it won’t affect the coil lifetime. if you use 50 in mesh, just the nic salt output will too strong.
Hello there how do u adjust voltage on this pal 2 mod,please let me know thanks.
Hi, Pal 2 couldn’t be regulated, it’s direct output power.
Hi,
Is it constant wattage or is it like a “bypass mode” like a mech device?
Hi Paul, it’s like a “bypass mode”.
Hi, How Mach is the product weight with pod?
Hi, the pal2 is 76g.
Man, so close to perfect. All that’s needed is adjustable wattage or at least consistent wattage. I hate how the loss of battery decreases the wattage and vape performance. Just need to a few selectable options like what Innokin did with the EQ or DV.
That’s the dream, 1000 mah, coils for both MTL and sub ohm DL, adjustable air and power settings in a attractive portable device.
Thanks, Mat.
hi if i’m in South Korea
where can i buy this?
I have the Pal2 since a few days ago. With the 0,6ohm mesh you got a smooth and warm vapor, plenty of flavor and good airflow for DTL vaping. If you close the airflow you can also use as MTL if you prefer.
During your puff you should notice a little voltage drop. I like it. It’s starts hard so the kanthal mesh can reach temperature and then it’s drops a little after 2-3 seconds… for me it’s a pleasure sensation.
Works great with 70/30 liquids, but you loose some throat hit compared with 50/50. In my case I vape with just 10mg/ml salt liquid, but I prove it with 20mg/ml salt and it’s not excessive the throat hit.
Cons… I should prefer a clearer pod so it’s difficult to see the liquid level… furthermore when you are refilling it.
Thank you.
Hye Artery. I just got my Artery Pal II. It’s was a AMAZING device though. I already love it. I have a suggestion for you. If you can design a catridge with 510 drip tip compatible, the Artery Pal II is more than better. Thank you for a great device Artery <3
Thanks for your suggestion, Emirul.
Hi, is this device constant wattage? Or does it get weaker the lower the battery gets? Thanks.
Hi Francis, it hasn’t constant wattage, it’s direct output power.
Hey Artery, just wondering if the Aspire Spryte BVC Coils use the same woodpulp cotton? Is there an alternative to the mesh coils aswell?
Hi Eric, the spryte bvc coil doesn’t use woodpulp cotton. The 1.2Ω MTL coil is a regular coil.
Hi, is this regulated or the same as mech mod?
Hi Jack, it’s unregulated, but it has protection, more like the “bypass mode”.
why current max charge is 800mah???
Hi Tom, because the bigger charging current probably makes the device overheat and affect the battery life.
Hello. If I want to use 35mg salt nic, which coil is suitable?
Hi, we suggest the 1.2Ω MTL coil.
Which Coil is best for Salt nic usage
Hi Jordan, the 1.2Ω MTL coil is better for salt nic.
Goodafternoon,
best charging with 1A or 500mAh charger? I can’t find an exactly 800mAh charger 🙂 Thanks. Filippo
Hi, 800mAh is the max charge current. You can use the 500mAh charger.
I recently purchased a Pal2 the coils that came with it did not last I purchased some Aspire spryte bvc coils and it is flooding with them. Already sent an email to your customer service and have not had any response yet.
Hi Jeffery, sorry for the issue. but “sales03@arteryvapor.com” had replied to your email yesterday, please check it. About the issue, We wonder how long the original coils last you, as for the aspire BVC coils, we are sorry that we don’t know it could have flooding issue, and I wonder how many aspire bvc coils you tired which have the flooding issue.
Thank you for getting in contact with me about the issue. The 1.2ohm coil lasted about 3 or 4 days and the mesh coil lasted about a week. I am using 24mg salt nic and the flavor was awesom especially with the mesh coil but they stopped wicking then they were burned.
Apparently I had gotten 2 bad coils I just swapped another coil this morning and no more flooding.
Ok, thanks for the reply. So a 1A charger can damage my precious PAL 2?
Regards,
Filippo
Hi, I just confirmed it. 1A charger won’t damage Pal2, it has protection. You can continue to use the 1A charger.
the max 800mah means even you use 1A charge, the input current still will be 800mah, we had set it in the chip. So you can use the 1A charger.
How do I change my pal v2’s battery? When I fully recharge ( The blue light is off ) I try to take a hit but the light turn to red and flicked 3 times. I think the battery may have some troubles 😕
Hi, the red light flicked 3 times means the atomizer is not connected. Please check the pod or the coil whether connected effectively. If you still have any question, please feel free to contact us at cs@arteryvapor.com or mia@arteryvapor.com.
How do you know when the battery is running low
Hi Mike, when the LED shows the red light, it means the battery only 5%-15%.
I recently purchased a Pal2, i’ve used it for a week, my 2 mesh coils lasted only 2 days, i wonder can you fix the coil lifetime?
P/s: i refilled it 2 times, the third time mesh coil die
Hi Tony, what kind of e-juice you used? how much e-juice each day?
i use daze mango iced 35mg, i fill 2/3 pod, the third time coil die
hi . why the red light bip 5 times when i hold the button for inhale smoke ?
Hi, it indicates a short-circuit. Please feel free to contact us by cs@arteryvapor.com or mia@arteryvapor.com if you need more customer service.
how to k ow when battery is fully charged ?
Hi Mike, LED light will turn off when the battery is fully charged.
Hye artery. My device is flick red 5 times. When i connect to charger the blue light is off. But when i push fire it flick 5 times.
Hi syed ,maybe it is the battery low-voltage shut down or invalid ,you can retry to recharge one hour again ,if ok ,then it can work normanly,if fail ,so it proved that the battery is invalid .
I have the same problem How to fix it?
I’m from Thailand.
Could you write the email to our customer sevice mailbox :cs@arteryvapor.com
Love the pal 2 the only problem I have had is the mesh coil only lasted a day
My pal 2 not fireup when i press the button. It blink red for three time.. Can u help me.. Tq
Hi, the three times red light means the atomizer is not connected. Please check your pod or the coil to confirm the effective connection.
so how can we repair this problem?
Please check your pod or the coil, try to replace the coil. Try to loosen the base slightly if it still no work. Please feel free to contact us by cs@arteryvapor.com if you need more customer service.
Hi Sir.. i’m rizal from Malaysia.
I’m interested to become a dealer for your product artery pal2 in Malaysia.. can u send me a quotation minimum order for this item..
Thanks
Please contact Tim ,he is in charge of southeast Asia market ,and his e-mail is sales08@arteryvapor.com ,and his wechat is : qjwytz
how can i get this artery pal 2 in malaysia?
Hi, you can get it in Vape69 site.
Hey.
Is there a reset button on this mod?
After done charging and unplug the charger the unit still think its charging.
How to fix this problem?
Hi John, it hasn’t reset button. Is the LED light flash to let you think its still charging or what happened? we need more detail about it.
can i use freebabse ejuice on .6 ohm coil?
Sure.
Hi, what is the material of POD?
Do you crack even if you put citrus liquid?
Hi Masa, it’s PCTG. Generally, it won’t crack.
how long 0.6 mesh coil can use ?
Generally, it can use 18ml ejuice.
Hi i bought the 3ml tank and it looks that the artery coil is not ”compatible” with that, it doesn’t stick to the base, could you help me with this?
hello ,sir,here we suggest you to try it again ,we insist it will be no problem.
ive got a suggestion the guys at work love my artery and i already own a couple of different vape pens and tanks. My artery was like 65,00 with the ejuices i picked it was apple crisp and the starburst was free and the pod was 3.75 with the free coils. would you consider doing like a t-shirt deal with the purchase of an artery 2 and a pod. they guys at work said they would go for it if a t-shirt or hat or both was in the deal thats ow they got their smok vapes with a t-shirt deal and thety dont like their smok device anymore they got first degree burns with those things as did i and the same thing with the compaq s series i was given a free replacement and they paid the dr bills in exchange for not suing them. im not new to vaping but when you follow directions to the letter and still get hurt thats ridiculous. anyways i jst thought id suggest this. i got my artery vaporbusters 2 in lebanon tn
Thanks for your support and your kind suggestions.
Using it for about a 1,5 weeks. And the taste is awesome, battery life is pretty good, filling system is pretty comfortable, overal quality is good. BUT. That side cover that does not close completely does rattle contanlly makes me soo mad.
P.S. It would be better, if user would be able to disassemble the device if he need to fix something (only an opinion).
Hi Tim, sorry for the cover’s issue. We don’t suggest non-professional disassemble the device, that will cause damage to the device. And we won’t warranty for the privately disassembled device.
Do I have to use the salt juice or can I use any kind?
Hi, you can use the salt juice.
Can I just use the non salt juice?
Sure.
Hi, these are awesome mods but unfortunately my pod is cracked and can’t find a new one. Can you point me in the right direction possibly? Thanks
Hi, we have sold empty pods separately. You find it by HeavenGifts site or other local sellers.
Hi,
Can I use vapeonly bvcc coils?
Hi Karlis, no, it only compatible with aspire sypte bvc coils.
my suggestion for this product : better if the back cover is clear material like plastic cover as it can give clear look to the liquid level in the pod
Thanks for your suggestions.
I find it difficult to twist the air flow and I don’t know which way to twist left or right up the flow or down
Hi Rosie,you need to take the pod out to adjust the airflow, then you can see it clearly.
why my artery pal 2 cannot charge..i used this only 2 month…
Hi, sorry for the issue. Please contact us by cs@arteryvapor.com or mia@arteryvapor.com for customer service.
What does it mean when the light on the side changes from blue to purple? I have had the device for 2 weeks and have successfully used it to go from a pack a day smoker to a successful quitter. I love the device. Just can’t seem to figure out the light colors and their meaning.
Hi Jim, LED light indicates the battery capacity. 0-15% is Red light, 15-50% is purple, blue means 50%-100%.
Please advise if it is possible to replace the battery on this device, and if so instructions on how to accomplish this.
Hi John, the battery can’t be replaced. Please do not disassemble the device, that will cause damage to the device. And we won’t warranty for the privately disassembled device.
This item is fastselling in malaysia, to find new OCC and catridge is so hard as many outlet out of stock. My question is, for how long you will keep supplying parts for this model before discontinued it?
Hi, we will always keep supplying them and release many products used the same coils.
any way to fix a short circuit problem?
Sorry for the issue, you can try to replace the coil. Please feel free to contact us by cs@arteryvapor.com if you need more customer service.
Haii., in manual it said during charging, after blue pulse, it will become constant., but mine directly after blue pulse the led is shut off.. is this normal or should i get help? Thank youu
Hi, sorry for the issue, it’s the chip reading wrong cause the light wrong. But it still will turn off the light when fully charge. It won’t affect your normal use.
Please assist the Lost Flave Orion company with a new pod designed like the Pal 2. I wish that I would have seen your beautiful little device before I bought my 70 dollar paper weight from them. I love your design and can not find much to be negative about other than the fluid level may be a little hard to see but I will be getting one of these little machines. Wouldn’t it be cool if it had a window in the cover with an LED somewhere around the pod to check fluid level.
Thanks for your suggestion.
Got my the pal 2 kit today and I cant stop vaping it. Love the kit and would recommend it to anyone. Well done Artery and Tony b you guys have overdone yourself. RSA
Thank you.
Hi.. i’m use 0.6 occ and 35mg salt nic.. because if i use 1.2 occ it feel less flavor..
Hi, we are doing the 1.0ohm coil, it will available after about 2-3 weeks.
Hope you can upgrade for occ to ceramic coil
Thanks for your suggestion.
Hello,I just got a new ARTERY PALII from my website dealer…but now I’m very interesting to buy a protective cover like I have been seen in your INSTAGRAM page…can you please tell where I can buy it…?!??!??
Hi, it pre-order on HeavenGifts site now.
Hi,
Can i use 2.5 or 2.0 ohm coil ?
I’m sorry you cannot use 2.0 and 2.5ohm coil.
Hi my artery cant charge… I’ve try to charge.. at first 3 sec it blink blue color then nothing happend… i try to on but it turn to red color for 3 time then off
Hi, blinking 3 times red light means the atomizer is not connected. Please check the coil and pod to confirm connective effectively.
Hi, i have charging issue with my pal2. When i connect to usb, its blue led blink once then it turned off. Is it something wrong with the battery?
Hi, that means it’s fully charged.
hye.i live in australia.which website i can buy it pal 2 by online??
Hi, you can get it by HeavenGifts site.
HELLO GUYS I JUST GOT MY LOVELY PALII AND I’M VERY EXCITED…BECAUSE IT WORK GREAT WITH THE 1.2 coil ON MY PREFERRED 50/50 TOBACCO JUICE AND I HOPE IT WILL BE SAME WITH THE 0.6 coil ON 70/30 JUICE…NOW I WOULD LIKE TO PROTECT WITH A KIND OF WRAP OR SOMETHING LIKE THAT…CAN YOU PLEASE HELP ME OUT TO FIND SOME WAY OR PLACE WHERE I CAN GET ONE…?!?!?
BEST REGARDS.
Hi, thanks for your support. Pal 2 has the holster, you can find it in HeavenGifts site.
El mejor por que he probado hasta el momento tanto para sales de nicotina como para líquidos con nicotina normal. Buen sabor tanto la resistencia de malla como la resistencia normal, grandioso golpe de garganta, durabilidad de la batería más que buena, cómodo rellenado y cómodo para el día a día donde portar un pod cómodamente y encima es precioso.
Hello. Do you guys sell the back case replacement? I think ive misplaced the back case
Hi, I’m sorry we don’t sell the back cover.
Hi. Please make ceramic version occ for pal 2 please.
Thanks for your suggestion.
I want this in wholesale
Hi,which country are you from,we will arrange the stall to contact with you .
where can i buy the improved version of the pal 2?
Hi, i hope artery make ceramic coil for pal 2..
Hi, thanks for your suggestion.
Hai…i can vape while the mod charging?thanks
Hi, we don’t suggest to do it.
ceramic coil please
Thanks for your suggestion.
there are differences in the packaging of new products and old products
No, their packages are the same.
How can I get it in India?
You can get it by HeavenGifts site.
Can I use power bank which is (out) 5v 2.1A to charge my pal2
Yes.
Hi, I’m very happy with this super machine, it’s great. I want order a replace coil and I’m in Europe. Can I replace for a 3ml coil or should I order the 2ml coil.
Why in Europe the coil is 2ml instead 3ml ?
Apprecaite your help, thank you very much.
Sorry, I’m talking about the pod… I have the 2ml and would like to know if I can replace to the 3ml pod… thank you…
Hi, you can replace the 3ml pod. Selling the 2ml version is the TPD regulations.
Hi, on my pal 2, the metal part that connects to the coil inside the pod (below the mouth piece) is a little off axis only when I put the coil in. Today my device starts spitting in tiny amounts but enough to ruin the flavor and taste bad in my mouth. How can I fix this why is this happening?
Besides this love the device, thanks!
Hi, I’m sorry it can’t be fixed. You can buy a new pod to replace.
Mine keep blinking red lights 3 times too often..i’ve already tighten up the occ & atomizer, but still the red lights keeps blinking. this is very frustrating. Pls tell me what to do. Thanks.
Please check your pod or the coil. Try to loosen the base slightly if it still no work. Please feel free to contact us by cs@arteryvapor.com if you need more customer service.
hy…can u check this code for artery pal 2…
AZA22TPD8XKZWYVR
Tq
Hi, it is a genuine product. You can check it in qr.arteryvapor.com by yourself.
hi .. just wanna ask how many hours artery pal 2 will last ?? then the hours of charging ?
Hi, generally it can use 1-2 pod e-juice with the 0.6ohm coil, and the charging time is about 1 hour.
Hi Artery…Which is better way to charge the device? What I mean, is better to take out the cartridge during charging time or is it ok if just keep the cartridge inside during charging? Thank you!
Hi, you can just keep the pod inside.
Hi , i just want to ask . Which occ is better , 0.6 mesh or 0.6 hp mesh ?
Hello,0.6 hp mesh will be better .
Hi. My Pal 2 won’t fire and the purple light is blinking 10 times. Please let me know what happen? Thanks
Hi, perhaps it’s the PCB issue. Please feel free to contact us by cs@arteryvapor.com for more customer service.
How to fix the pcb issue
Hi, we don’t suggest non-professional disassemble the device, that will cause damage to the device. Please contact us by cs@arteryvapor.com for customer service.
where can i buy the magnet hidden version of the pal 2?
Hi Steve, please ask the retailer before you order it.
can anyone help me solve my artery pal 2 problems? i dont know what the problems it is. when i started to suct. i see the red light blink 3 times & then the smoke doesnt come out. but my battery already charged. i think its all about the occ or the airflow ring or the cartridge or something else, i dont know. but can anyone help me solve this. thank you!
Hi, blinking 3 times means the atomizer wasn’t connected. Please check your pod or the coil. Try to loosen the base a half turn if it still no work. Please feel free to contact us by cs@arteryvapor.com for more customer service.
same things happened to me, and i already did your suggestions, but the problem still occur, what should i do?
Please write your problem into our customer mailbox :cs@arteryvapor.com
ceramic coil please
Thanks for your suggestions.
How to claim warranty?
Please feel free to contact us by cs@arteryvapor.com.
Hi..just bought the pod..for first time charging, how long should i charge it? or can i just leave it overnight charging?
Hi Andy, the blue light will turn off when it fully charged.
My experience about 30 minutes
Hello
the product is frankly good but I think there should be another intermediate coil like 0.8 ohm or similar. You are going to manufacture coils for this good device?
Hi, thanks for your support. A 1.0ohm coil will be released quickly.
Hi… I’m very interested to buy this AIO n will be first AIO device. I just want to know the coil life in normal use. Thanks…
Hi, generally, the 0.6ohm coil can use ≤15ml.
Noted, long life coil…
When to replace the coil or cartridge in a month? for the use of 3 ml of liquid per day.
Hi, generally, the 0.6ohm coil can use ≤15ml.
Is it 1.0 mesh or regular?
It’s regular.
My Pal 2 starts to fire on its own..bought it about 2 months ago..anyway to fix it…
Hi Wan, sorry for the issue. We can’t contact you by your email address. Please contact us by cs@arteryvapor.com for customer service.
Hi, i just bought my PAL 2 last nite. My question is how long should charge until it full? its normal when charging red led slowly blinking.
Yes, when the led light off means it fully charged.
Hi. I have a problem with the pod. The blue led still on when I push the button while it is off. Is it normal? When I charge. The blue led turn on then turn off but my battery is about to die.. The led shows red while I vaping. Hm
Hi, your battery is fully charged. How many time does the red light blink? Please contact us by cs@arteryvapor.com for customer service.
Can I use 35mg salt nic with 0.6, and is there any effect?
Yes, and the 1.0ohm will be released soon, it will more suit for salt nic.
Hey guys i dont know why but my 1.2/0.6 coil both lasted very short like 3-4 days and by that time it’s started to taste burnt or no taste compared to the first time I installed any coil. Why???!
Hi, how many pods e-juice were you use before it burning? Generally, the 0.6ohm coil can use ≤15ml.
but i used less than that hmm
The lifetime will be affected by different e-juice.
Do you sell the accessories for the inside the artery pal 2, because my chip inside the artery pall 2 is burning.
Hi, we don’t sell the accessories for the inside. We also don’t suggest non-professional disassemble the device, that will cause damage to the device.
Hi,
Are you going to release the version with the magnets behind the plastic? I have two and in both of them the magnets are exposed and both of them the magnets popped out. I glued them back in on the first one but now the cover doesn’t fit tightly. It’s a very annoying problem for an otherwise great product.
Hi, sorry for the issue. The new version was released. Please confirm that the direction of the magnet before gluing them.
Hi, is the LED indicator still on when charging?
Hi Verry, yes it will off when fully charging.
Hi Artery…
I have one suggestion here. I’m excited about your 1.0ohm MTL coil. But so sad it comes in regular coil instead of mesh coil. For me, it is better firing with mesh coil because the area of the firing is bigger compared to regular coil. I’m very sure many users out there are using 0.6 mesh coil for salt nic ejuice. Why? Because it produce better firing with high power wattage, and the area of the for the firing is bigger. Even more throat hit compared to regular coil. Maybe you can produce 0.8ohm MTL mesh coil? So you can list up your occ with 0.8ohm MTL mesh coil also.. Just my 10 cents….cheers!
Hi, thanks for your suggestions. We tried the 0.8 mesh and 1.0 mesh, the performance is not very good, but we gonna release an updated 1.0 coil, use a different material, the performance is very good, amazing flavor plus long-lasting (30ml e-juice consumption )
it will be released 2-3 weeks later.
Good news heard from you. Can’t wait to test it!
How often should the Pod be changed (since it is made of plastic)?
Hi, we suggest you can change it every two months.
Now Malaysian Market got many shop sell Arworld R3 OCC coils. Shoppers told their customers this coils better than previous one that made by Artery itself? Does this true? Or Arworld got license to make OCC for Artery too?
The R3 coils are not authorized by us, we tested their coils, the advantage of the R3 coils are wetter than our coils, they will get spit back, and easy to suck e-juice into the mouth, which seems may make people feel more flavor, and with coils get wetter , but good news is we will release the improved HP CORES (high-performance coils ) 2- 3 weeks later, it will bring amazing flavor and long-lasting.
Hi, can i wash and reuse the .6 and 1.2 coil? If so, instruction for washing? Very satisfying product and already poisoned 3 of my friend to buy. Cheers
No, coils can’t be washed. Thanks for your support.
This pod have overcharge protection?
Yes.
how long the Pal 2 span life if I charge the battery correctly?
Like the mobile phone, battery capacity will drop to 80% after 500 cycles.
I am waiting for ceramic coil, all of which I like with artery pall 2
Thanks for your support.
is the 1.0 coil can be used for freebase e-juice? or its better for salt nic?
yes it’s better for salt nic, and also can use freebase e-juice.
I just got my Pal 2 and I didn’t think I could find a vape I liked as much as my Orion DNA but this device is amazing and I buy a lot of devices Smok Nord is terrible the VapeAnts E8 is ok Aspire AVP sucks and that’s just in the last few months. Finally Pal 2 and Orion devices that satisfy my nicotine fix as much as the expensive JUUL. My only complaint is that you don’t supply pods and I purchased 2 of them. One of the pods works fine and has my .6 coil the other which is the one I prefer has the 1.2 coil which the bottom air flow will not open and I’ve even tried putting a little juice in it I tried so hard I removed it from the plastic seating pushed it back seems not to leak but still can’t open the air flow.
If possible I would like that pod exchanged. They are the newer pods which are clear but either is fine. Also one last question you now advertise a 1.0 coil what’s the difference? Why the change? (I really like the 1.2 but I’m curious to try the new one) and can I still get the old ones?
Thanks
Rob Guirguis
Nice unit !!!
Sent from my iPhone
Hi, thanks for your support. 1.0ohm coil will bring amazing flavor and longer lifetime. About the pod, please contact cs@arteryvapor.com for more customer services.
By the way if you do make a drip tip style pod like people keep asking keep the original design as well I love the tip you are using now don’t think you need to change it I actually wish my Orion had a tip like yours.
Great job on design can’t make everyone happy!!!
Thanks for your support.
Where can I buy the Rainbow version?
You can get it by HeaveGifts site.
I mainly bought this device because of its small size and the reviews I read were 99% positive. I don’t need something that can make clouds so thick u can’t see, or a giant battery mod that lasts days and has 20 different settings I know little about. I want a simple device that I fill and it just works! And THIS IS IT! U just fill it up with your favorite juice, AND VAPE! It has real nice clouds and excellent flavor with mouth to lung hits, as well as the same good flavor with real descent big clouds on straight lung hits too! They even include 2 coils. 1 for mouth to lung and 1 for direct to lung hits. And the battery lasts all day too! This was a impulse buy to have a small light AIO to carry in my pocket with ease and convenience and it turned out to be a really GREAT device i’ve quickly come to love and use daily. U wont regret buyin it now!
Thanks!
Hi,
So for MTL there are 1ohm & 1.2ohm coil right?
Which one is newer? Whats the difference?
Thanks
Hi, 1.0ohm is the new one, it has better flavor and longer lifetime.
is that true you make a new artery pal ii design that allowed user to see a flavour level in realtime(on the spot)
Yes, 3D Cube/Dazzle Blue/Ocean Shell these colors have the new design.
Will you bring us the newest PAL 2 pod kit within camouflage style recently? Many vapers I knew were expect that for a long time like me.
請問近期內會有迷彩新色的PAL 2上市嗎?許多我認識的煙友都像我一樣期待迷彩版本很久了。
I’m sorry we haven’t the plan yet. But new colors are released, hope you like them. 很抱歉,我们还没有计划这个颜色。新的颜色已经上市并做了一些改进,希望你们能喜欢。
hi,could u please tell me which way is the direction to open the airflow? left or right? i am a recent quitter of tobacco and this is my first pod.now i only use the default airflow set…nice taste btw 🙂
Hi, turning right is to open the airflow. You can see the hole.
ah,thank you so much for the reply.so i just have to turn the airflow right until i can’t turn it again,and that’s the maximum for the loose airflow,right?
is that true you make a new artery pal ii design that allowed user to see a flavour level in realtime(on the spot)
Reply
May 15, 2019 at 2:56 am
ARTERY
Yes, 3D Cube/Dazzle Blue/Ocean Shell these colors have the new design.
What does this mean? The door is clear?
Is the door the same design as the front on the 3 new colors?
The door of new colors has a new design. The PAL 2 page was updated, you can see the design of the e-juice window in that.
Are there any other updates to the system?
ah,thank you so much for the reply.so i just have to turn the airflow right until i can’t turn it again,and that’s the maximum for the loose airflow,right?
Hai, when will the new pal 2 available in malaysia? or any other store that i can buy online from malaysia.
Hi, it will available in Malaysia about a week later.
Can pal2 charged with head charger 2A output? Will it regulated to 800mah by itself? It’s a waste to buy 1A charger only for it..
Yes you can use the normal charger. it will regulate to 800mah.
Hi, when my pal2 finished charging, and I pressed the button to give a hit. It made beep sound. (Still blue light, didn’t turn in red) Why?
Hi,because the device is over charging ,so the power is too bigger,after you use it for a moment ,it will be normal phenomena,don’t worry about it .
Hi, I just got my device today and why is my artery metal gold making a buzzing sound when I’m firing the device? I noticed the sound after it was fully charged.
Hi,because the device is over charging ,so the power is too bigger,after you use it for a moment ,it will be normal phenomena,don’t worry about it .
When will the new version and hp cores be available in the USA?
Elementvape will release it before June 15th.
why the red light is glowing after fully charge
Hi,can you write your problem then send to our customer sevice mailbox cs@arteryvapor.com.
hi in order to have my battery last longer. everytime i use it should i empty my battery before charging?
Hi,no need sir ,what you do didn’t have any effect on the battery .
What is it HP CORES
Keep focus on our offical website and FB please.
I m in Malaysia, i bought and use Pal II for only less than 2 months and now cant be used. The shop says no warranty.
I feel cheated. Is Pal II a reliable product amd how come it doesnt have warranty if faulty?
Hi ,Zafre,we provide the warranty for 3 months,please write you exace problem to our customer sevice mailbox cs@arteryvapor.com
Which one of the site are gone have the new version first?
Hi,you can check the shopee sir .
When will the new version and hp cores be available in indonesia??
some wholesaler they have get the goods ,it will appear the market soon .
It is in reality a nice and useful piece of information. I’m satisfied that you shared this helpful information with us. Please keep us up to date like this. Thank you for sharing.
I want this where i can get it I am in malasiya penang now
Hi ,Deepak ,you can order it on our offical website .
All I can say.. THIS ONE IS AMAZING !!! LOTS OF LOVE ?♥️♥️♥️♥️♥️♥️♥️
Hi, If I purchase the Pal 2 on your website, will it be the updated version?
Hi ,Lee F ,it will be the updated version.
Hi, I am trying to purchase the new Pal 2. Is it available on your website? if not when will it be available
Hi fred ,you can make an order on our website ,it will ship to your hand within 3-7 days .
Ceramic coil please.
We will consider about it .
Hi…… I just bought my artery pal 2 device……. After 2 weeks of usage the fire button gives 3 times red light and cennot heat up the coil…… What is the solution?
Hi,can you write your problem then send to our mailbox cs@arteryvapor.com
Im facing the same problem also..
I just bought a new pal 2 and fill it with freebase e-juice, my local vape store recommend me to use 50:50 pg/vg ingredients, what happen if use other ingredients ? And what happen if I’m using a max vg ingredients instead ? I would like to know your recommendation. Thank you ~
Hi,we suggest 50%-70% VG
Hello,so sorry to bring you trouble like this ,please write down the problem and send to our mailbox cs@arteryvapor.com,nice day !
Please send the email to majiafa@dhxtech.com
When does the new version which have a ejuice window will be launch in Malaysia
some of local suppier they have receive the goods ,you can take care for the local store.
Hi. May i know about charging time until the device is fully charged? I’ve charge it for like 3 hours and the blue led is still blipping.
Hello, because sometimes the device was influenced by the environment ,temperature,humidity and so on,so the divice it will get the wrong reaction ;Anyway ,you just charge one hour is enough ,it won’t influence your usage !
Hi
I just bought the pal 2 update version
Why does my led still pulsing blue color even i have charge it for 2½ hours. Normally how long it take to fully charged?
Tq
Hello, because sometimes the device was influenced by the environment ,temperature,humidity and so on,so the divice it will get the wrong reaction ;Anyway ,you just charge one hour is enough ,it won’t influence your usage !
Tq for the info
Hello Artery,
I got a problem. I bought this device, after 5 days of usage the fire button gives 3 times red light and cannot heat up. I try to put my catridge to other pal is works can heat. Fix my pal device is broken. Can i have new one? 🙁
Please write your problem into our customer mailbox :cs@arteryvapor.com
hey, I want to ask about the light indication on the Pal 2.
mine always changes red and blue green and cannot be puff
Please write your problem into our customer mailbox :cs@arteryvapor.com
Can i wash/submerge the metal cap (the metal cap that connects to the coil) in water when i am washing the pod?
Hello,sir, yes of course you can do that.
Hi artery,
Can anyone help me, my artery pal 2 cannot be charge. When I plug in the usb, the blue light was came out but just a few seconds then no light appear. I used more than 2 months but this is the first time happen.
Is that battery problem or the charging pod problem?
Hi,Dear ,can you write your problem to our customer sevice inbox : cs@arteryvapor.com
I has Bought 2 Pal II without windows e juice & with windows ejuice…I think pal II without ejuice is more saving battery than Pall II with windows ejuice…
Hi, are the new HP cores compatible with the old version of Pal 2?
Yes ,it is
Can you get any color with a liquid viewing window? If not, which colors have liquid viewing windows? And, without a liquid viewing window, how do you see the liquid?
For the Pal 2 it wasn’t with the viewing window ,please keep tuned for our next product.
hi there… can i know which one that is arterypal 2?? as above image i can see two different mod?? one the ‘PAL 2’ grave at side top of mod and another one at side middle of the mod??
It is both from the Artery pal 2 ,because it launch on the market in the different time .
hello, thanks to this device,has been 3 months i totally quit tobacco smoking from almost 2 packs a day,to none.
but for few days, my device starts making beeping sound everytime i press the firing button.the sound gets louder when the battery full,and makes me concern. Is this dangerous? or does my pal 2 broken? thanks before